My Atlas GA160 air compressor can not start up, sometimes when in use, there will be oil out of the air filter, what is the reason?Today we will explain the reasons for this in detail。

Air compressor air filter outlet oil specific reason analysis:

1, air intake valve balance hammer or check valve sealing surface dirt, sealing surface damage or stuck will also lead to air filter oil return。

2, abnormal shutdown (such as power outage shutdown, snap stop shutdown), the unit with pressure shutdown resulting in the intake valve closed less than time or closed without sealing, high pressure oil and gas from the intake valve。

3, the equipment exhaust oil content is high, some unloaded into the air filter model self-discharge valve into the air filter gas oil, resulting in air filter oil, at the same time accompanied by exhaust oil。

4, if the intake valve oil barrel oil level is too high，When the temperature of the screw air compressor unit is too high, the shutdown relief valve is discharged too fast，High pressure emergency stop is due to high temperature and rapid pressure change，If the screw oil foaming is poor，It causes a lot of air bubbles to rush into the oil，Resulting in more oil in the discharge pipe，It is also easy to form the phenomenon of oil return at the air filter。At the same time, the oil content in the exhaust gas is large。

The above is a small series forAtlas GA160The machine can not start, the specific analysis of the reason for the oil out of the air filter。hereAtlas compressorXiao Bian also reminds you that the failure of screw air compressor will not only affect its service life and the personal safety of the operator, but also have a certain impact on production。Therefore, it is necessary to understand the fault of screw air compressor and know how to eliminate the fault of screw air compressor。